Are you fed up with your flaring tool? If so, then the 007 Brake Line Flaring tool is what you need. This tool is 12 pounds of steel in a compact, clever arrangement that makes flaring brake lines amazingly easy. Using its fast cam and lever action, you can press a perfect double flare in 30 seconds. Its precision made punch and smooth bore die blocks grip and form the flare without damaging the tubing. With this tool, you can make aircraft quality flares for SAE 45 degree double (inverted), DIN (ISO/bubble) flares and British bubble flares.
We have purchased and tested almost every brake line flaring tool on the market, and this is the finest, most reliable tool we have found. Our shop has been personally using this tool for 20 years, and we are quite proud to now represent the manufacturer and have the honor of supplying this tool to you.
This is what one of our customers had to say about the tool:
I would like to thank you for locating and importing a wonderful, well made tool and for the very prompt service. It does everything that you promised, accurate, repeatable (no old maids yet), and fast. After a month of frustration and nearly 100 unacceptable flared ends, I was about at my wits end. I was kind of gun shy from the failure rate of all the other tools that I have tried. Let's just say, that I was very skeptical about your claims, so since receiving it on Tuesday (ordered on Friday), I made about four dozen samples in a variety of materials from various vendors. Fast: once prepped about 10 to 20 second turnaround, accurate: not one, single bad looking end, repeatable: everyone looked better than the factory flares. This was true for the bubble and double flares done with your tubing samples, my 1/4" 304 SS and the OEM Bundy weld. Absolutely no slippage or marring of the tube beneath the flare nut, and dead on center every time. Thanks again, I could not be happier with the results and I will do all I can to pass this on.
Denny Graham - Sandwich, IL
|
|
|
|
|
Brake line flaring tool with 3/16" SAE, 1/4" SAE punch and die sets
Make perfect flares in seconds!
Made in England
|
|
|
|
|
|
|
007C Brake line flaring tool with 3/16" SAE, 1/4" SAE
and 4.75mm DIN punch and die sets
Made in England
|
|
|
|
|
|
|
3/16" SAE punch and die set
Makes SAE flare (45 degree inverted/double)
Must be used with the 007 flaring tool - cannot be used by itself
|
|
|
|
|
|
|
1/4" SAE punch and die set
Makes SAE flare (45 degree inverted/double)
Must be used with the 007 flaring tool - cannot be used by itself
|
|
|
|
|
|
|
5/16" SAE punch and die set
Makes SAE flare (45 degree/ inverted/double)
Must be used with the 007 flaring tool - cannot be used by itself
|
|
|
|
|
|
|
3/8" SAE punch and die set
Makes SAE flare (45 degree inverted/double)
Must be used with the 007 flaring tool - cannot be used by itself
|
|
|
|
|
|
|
4.75mm DIN punch and die set
Makes DIN flare (ISO/bubble) on 3/16" brake line
Must be used with the 007 flaring tool - cannot be used by itself
|
|
|
|
|
|
|
6mm SAE punch and die set
Makes SAE flare (45 degree/ inverted/double)
Must be used with the 007 flaring tool - cannot be used by itself
|
|
|
|
|
|
|
6mm DIN punch and die set
Makes DIN flare (ISO/Bubble)
Must be used with the 007 flaring tool - cannot be used by itself
|
|
|
|
|
|
|
8mm SAE punch and die set
Order the 5/16"/8mm SAE punch and die set
Makes SAE flare (45 degree /inverted/double) on 5/16"/8mm brake line
Must be used with the 007 flaring tool - cannot be used by itself
|
|
|
|
|
|
|
8mm DIN punch and die set
Makes DIN flare (ISO/bubble) on 5/16"/8mm brake tubing
Must be used with the 007 flaring tool - cannot be used by itself
|
|
|
|
|
|
|
10mm SAE punch and die set
Makes SAE flare (45 degree inverted/double)
Must be used with the 007 flaring tool - cannot be used by itself
|
|
|
|
|
|
|
10mm DIN punch and die set
Makes DIN (ISO/Bubble) flare
Must be used with the 007 flaring tool - cannot be used by itself
|
|
|
|
|
|
|
12mm SAE punch and die set
Makes SAE flare (45 degree/ inverted/double)
Must be used with the 007 flaring tool - cannot be used by itself
|
|
|
|
|
|
|
12mm DIN punch and die set
Makes DIN flare (ISO/Bubble)
Must be used with the 007 flaring tool - cannot be used by itself
|
| |