FAQ

Links

Browse Categories

Links below contain tubing and the nuts and fittings for that size tubing


	FAQ To jump to specific help information click on the links below: Is Cunifer™ Legal? Is it DOT approved? How do I tell what I need to replace the brake lines on my car? Do you sell braided steel Flex lines? Is there a corrosion problem due to dissimilar metals when using Cunifer™? Can I flare Cunifer™ with my flaring tool?? Why do we say not to use flaring tools with serrated grips? What punch and die sets do I need? Can I flare stainless steel tubing with the 007 brake line flaring tool? Can I make a 37 degree flare with the 007 brake line flaring tool? Can I make a single flare with the 007 brake line flaring tool? Is Cunifer™ legal? Yes, of course it is! There is a tremendous amout of MISINFORMATION out there regarding what is legal or not. The facts speak for themselves and it's a fact that Volvo, Porsche and Audi have been installing it for years now. Back to top Is it DOT approved? YES Back to top How do I tell what I need to replace the brake lines my on my car? It's really very complicated. If you don't normally work on your own car, now is not the time to start. Please seek professional help. If you always do your own work but have never really done brake lines, it's worthwhile to figure it out. Once it's figured out, the install is fairly straight forward. Back to top Do you sell braided steel flex lines? We do not make or sell flex line/brake hose assemblies. Please visit our friends at Crown Performance They can make "DOT approved" brake flex lines. Back to top Is there a corrosion problem due to dissimilar metals when using Cunifer™? No more than usual. Always anti-seize nuts and tubing. Back to top Can I flare Cunifer™ with my flaring tool? Brake line flaring tools vary widely in quality. If you can flare steel tubing with your flaring tool, you can flare Cunifer™ tubing. Back to top Why do we say not to use flaring tools with serrated with grips? Serrated grips damage the end of the brake tubing no matter what kind of brake tubing you use. Back to top What punch and die sets do I need? For double flaring for common American brake line applications order 007B with 3/16" and 1/4" punch and die sets. For European applications order the 007 flaring tool with 3/16" and 4.75mm punch and die sets. You will need to call to place this order. The best choice - order the 007C flaring tool with 3/16", 1/4" and 4.75mm punch and die sets. This set allows you to do virtually all brake line applications (except Citroen!). The 4.75mm (ISO/bubble) flare is beginning to appear on late model American cars and trucks. Back to top Can I flare Stainless Steel tubing with the 007 brake line flaring tool? Tubing varies widely in type and manufacture. If you have a coil of Stainless Steel tubing from one of the large retailers, yes it will flare it. Back to top Can I make a 37 degree flare with the 007 brake line flaring tool? No Back to top Can I make a single flare with the 007 brake line flaring tool? No Back to top

Shopping Cart


	Your cart is empty.

Account Login

Email Address:

Password:

You will be prompted to enter your password on the next page

Create an account
Forgot Password?

Powered by nsCommerceSpace by Network Solutions